MAC IPSEC VPN CLIENT PFSENSE DOWNLOAD

By default, AWS provides you two redundant tunnels. Don’t worry about the second tunnel down. Also, make sure that the VPN tunnel is UP on the AWS side. Once completed you should see something like this under the Routes.Īt this point you should be able to reach all instances back and forth.

We have to Edit that and check the checkmark, so all the internal traffic uses the Virtual Private Gateway. So, click on Route Propagation and see how the Propagate field says No. So, we have to tell AWS to use the Virtual Private Gateway for our local subnet. If an instance in AWS tries to reach an instance behind pfSense it will try to reach it over the Internet. This means that all the traffic that goes to 172.31.0.0/16 subnet, which is the VPC’s internal subnet should use local routing and all other traffic to use igw-b31598d6 which is the Internet gateway. If you go back to AWS and click on route tables you’ll see something like this. Because we are using static routes, we have to tell AWS to use the Virtual Private Gateway to reach our internal network. It allows traffic from my internal network to reach AWS.īut that’s not all. It is assigned to all of my AWS intances. In my case, I have a security group that looks like this. Now, we have the rules in place that allows the traffic originating from AWS to pfSense to pass through, but if you want the traffic originating from your internal network to reach AWS, you’ll have to assign AWS Security groups to the instances that allow traffic from your internal network. If everything is OK, you’ll see the connection established. Go to Status | IPsec from the menus and click Connect. Once you apply the changes it should look like this.

Click Add and allow the traffic that suits your needs. Now, we have to allow the traffic coming from AWS to our internal network.įrom the menus in pfSense, go to Firewall | Rules and click on IPsec. You can get that if you click on the VPC and check the IPv4 CIDR column.įor some reason, my VPN tunnel got disconnected a lot if there was no traffic, so under Advanced Configuration I had to enter an internal IP of an AWS instance to be pinged all the time to keep the traffic flow. For the Remote Network subnet, enter the subnet of your VPC. Read the values from the text file so it looks like this. It looks like this.Īs with Phase 1, do the same for Phase 2. Fill out the values from the text file that you just downloaded from AWS. You’ll see something like this.Ĭlick on Add P1. Go to your pfSense box and choose VPN | IPsec from the menus. This file tells you pretty much what to do on the pfSense side. Make sure you open this with Wordpad or Notepad++. When prompted, choose the configuration for pfSense.

MAC IPSEC VPN CLIENT PFSENSE DOWNLOAD

Select your Virtual Private Gateway and from the Actions, choose Attach to VPC.Īgain, go back to the initial entries, select VPN Connections and click on Download Configuration. Go back to the initial entries and click Virtual Private Gateway. You don’t have to enter anything for Tunnel Options. If you have more subnets at home/work, add them all if you want to be reachable. Name it, choose the Virtual Private Gateway that you just created and also choose the Customer Gateway that you created initially.įor the Routing Options, select Static and enter the subnet that’s behind your pfSense. Go back again and this time click the last option to create a VPN Connection. Go back to the same entries on the left and click to create a Virtual Private Gateway. Name your gateway connection and enter the external IP of your pfSense box. On your left side at the bottom, you’ll see these items.Ĭlick on Customer Gateways first and then click to create a Customer Gateway. Log to your AWS account and go to your VPC.

Mac ipsec vpn client pfsense